Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!wasatch!uplherc!wicat!keithm
From: keithm@wicat.UUCP (Keith McQueen)
Newsgroups: comp.os.cpm
Subject: MITS disk subsystem
Summary: Need CP/M for MITS disks
Message-ID: <407@wicat.UUCP>
Date: 20 Jun 89 17:06:00 GMT
Reply-To: keithm@wicat.UUCP (Keith McQueen)
Organization: WICAT Systems, Orem, Utah
Lines: 32

Hello!

I don't normally post to this group though I have been reading
it for a while.

My question:

I recently picked up a a swap meet an IMSAI 8080 computer with
a pair of MITS 8" diskette drives.  I'm sorry I don't have the
model number with me, but the controller is a two board set
with ribbon cables connecting from the right side of the boards
looking from the front of the machine.

Does anyone have CP/M configured for these drives?  I can do the
console driver if I have to, but I don't have the time to write
disk drivers, formatters, boot code etc.  I would love to get
this old beast up and running!  The computer seems to operate
ok, I was able to key in a short program through the front panel
and run it.  (I wouldn't want to key in a long one!  :-))))

I have the documentation on all of the other boards in the 
machine.  I just need info and software on the MITS disk
system.

Thanks loads in advance!!!


-- 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| Keith McQueen, Wicat Systems Inc. , (801)224-6605 | My opinions are |
| N7HMF @ NV7V (84058), 147.34+, 449.675-           | all mine...     |
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -