Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!caip.rutgers.edu!trudel From: trudel@caip.rutgers.edu (Jonathan D. Trudel) Newsgroups: comp.sys.amiga Subject: Re: Apple Laserwriter with Amiga Message-ID: Date: 16 Jun 89 15:08:19 GMT References: <422@accsys.UUCP> Organization: Rutgers Univ., New Brunswick, N.J. Lines: 5 Standard Apple Laserwriters come with a straight serial port - just send down the appropriate postscript commands (at either 1200 or 9600 baud). No special hardware is needed, except for a serial cable. Of course, you'll need something that stuffs Postscript down the serial port, but that should be easy.