Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!dptcdc!tmsoft!masnet!canremote!rob.sudbury
From: rob.sudbury@canremote.uucp (ROB SUDBURY)
Newsgroups: comp.sys.amiga
Subject: Re: NUISANCE OR PROBLEM?
Message-ID: <89061907384711@masnet.uucp>
Date: 13 Jun 89 06:50:00 GMT
Organization: Canada Remote Systems Limited, Mississauga, ON, Canada
Lines: 71

Okay gang, here is a simple question for you all to help me figure out. 
I am not a programmer, but a skilled user.  I have had my Amiga for 2
years now, and happily with the advent of kickstart 1.3, and Workbench
1.3, I expanded my system with a 64meg ST-277N SCSI HD and have had fun
setting up startup-sequences with this new DOS.
 
With or without the hard drive or controller hooked up I keep getting
`pure bit not set' feeds on the CLI startup screen with my
startup-sequence.  WHY?  Here it is:
 
C:CD C:
AddBuffers DF0: 10
AddBuffers DF1: 10
AddBuffers DH0: 10
AddBuffers DH1: 10
AddBuffers DH2: 10
SetPatch
Echo....
Sys:System/FastMemFirst
BindDrivers ; using the Comspec A2000 SCSI Host Controller and softw
;
Resident C:Resident pure
Resident C:Assign pure
Resident C:MakeDir pure
Resident CLI L:Shell-Seg SYSTEM pure add
Resident C:Execute pure
Resident C:CD pure
;
MakeDir RAM:clipboards
MAkeDir RAM:env
MakeDir RAM:t
;
Assign CLIPS: RAM:clipboards
Assign ENV: RAM:env
Assign T: RAM:t
;
Mount NewCON:
FailAt 11
Mount Aux:
Mount Pipe:
Mount Speak:
;
SetClock Load
FF >NIL: -0
;
Resident Assign remove
Resident MakeDir remove
Resident Mount remove
Resident Resident remove
;
SYS:System/SetMap USA1
Path RAM: C: SYS:Utilities SYS:System S: SYS:Prefs add
Copy SYS:RAMDisk.info to RAM:Disk.info
LoadWB delay
Delete RAM:Disk.info
CD SYS:
C:EndCLI
 
I gave you the whole shooting match, just in case you have questions on
what the whole thing contains.  
 
*Note:  I haven't actually entered the AddBuffers DH# series of commands
as my Chassis is out for repairs(an A500 Subsystem expansion chassis),
nevertheless, the `pure bit not set' message pops up when this
startup-sequence is on the inboard floppy with no peripherals attached. 
I am adding the DH# stuff in hopes of speeding up my ST-277N from
120K/sec reads to the touted near 300K/sec reads.
 
RS

 * QNet 1.03a2: CONNECTed II 'THE BBS' - Peterborough, Can. (705) 743-7296.