Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!ucdavis!vega.ucdavis.edu!u586182058ea
From: u586182058ea@vega.ucdavis.edu (0040;0000007686;0;340;143;)
Newsgroups: comp.sys.amiga
Subject: Re: NUISANCE OR PROBLEM?
Summary: nuisance
Keywords: No prob
Message-ID: <4707@ucdavis.ucdavis.edu>
Date: 20 Jun 89 21:08:48 GMT
References: <89061907384711@masnet.uucp>
Sender: uucp@ucdavis.ucdavis.edu
Reply-To: u586182058ea@vega.ucdavis.edu (Bruce Rogers)
Organization: University of California, Davis
Lines: 21

In article <89061907384711@masnet.uucp> rob.sudbury@canremote.uucp (ROB SUDBURY) writes:
>With or without the hard drive or controller hooked up I keep getting
>`pure bit not set' feeds on the CLI startup screen with my
>startup-sequence.  WHY?  Here it is:
> 
>Resident Assign remove
>Resident MakeDir remove
>Resident Mount remove
>Resident Resident remove
>;

In order to make these resident, their pure bits need to be set.
-> "protect Assign prwed"
just do this to all of them and it should work fine.

I had this problem for awhile also.

------------------------------------------------------         Quantum _\/_
919 Drake CellBlock 146   Bruce (6502 RULES!) Rogers        |\  Duck  ( 0 0)
Davis, Ca 95616           Quantum Duck Software,           |\ \______/ / \\\
916-753-1169              u586182058ea@vega.ucdavis.edu   |\ <  <     |   \/