Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!decwrl!frambo.dec.com!CB
From: CB@frambo.dec.com (Christian Balzer)
Newsgroups: comp.sys.amiga
Subject: Re: 68020 based Amiga
Message-ID: <8906210643.AA20251@decwrl.dec.com>
Date: 21 Jun 89 06:43:57 GMT
Organization: Digital Equipment Corporation
Lines: 29

[Do line-eaters prefer brackets or braces?]

In message <625@bnr-fos.UUCP> Alan W. McKay (from the GreatWhiteNorth) writes:

[Things about a friend looking for an UN*X Amiga and the 2090 not working
in overscan] 

First off, the 2090 works just GREAT in overscan. Runs just like a charm on
my overscan PAL workbench screen (690x274x2). The x2 is the deciding factor,
thats the bitplanes. The only modes the 2090 drastically goes down from it's
otherwise outstanding performance is in 4 bitplanes hi-res (ie.640x200/256 or
640x400/512) plus overscan. The current AMIX doesn't use 4 bitplane screens
as default (although it probably could).

And if your talking Amiga and Unix TODAY, it's an A2500. Full Stop. :-)
Currently AMIX only supports the A2620/A2630 and those units only know how
to handle the 209xx HD controllers (to boot Unix...).
These things might change, but not within the next 6 months.
And I dunno if a BSD UN*X will be ported, or if by the time this would happen
the AT&T stuff has come close to it. :-)

Regards,

- <CB>
--  _  _
 / /  | \ \  <CB> aka Christian Balzer  - The Software Brewery -
< <   |-<  > EMail: ...!decwrl!frambo.dec.com!CB -OR- CB@frambo.dec.com
 \ \_ |_/ /  E-Net: FRAMBO::BALZER | Home-Phone: +49 6150 4151 (CET!)
------------ PMail: Im Wingertsberg 45, D-6108 Weiterstadt, F.R.G.