Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!uwvax!astroatc!nicmad!madnix!aaron
From: aaron@madnix.UUCP (Aaron Avery)
Newsgroups: comp.sys.amiga.tech
Subject: Re: multiple serial ports
Keywords: assembler serial ports
Message-ID: <695@madnix.UUCP>
Date: 21 Jun 89 06:04:19 GMT
References: <1057@sactoh0>
Reply-To: aaron@madnix.UUCP (Aaron Avery)
Organization: ASDG Incorporated
Lines: 11

ASDG has a dual serial board for the Amiga 2000 which should provide for your
needs.
You would access it from assembly language the same way you should access the
Amiga's serial port. That's using the serial.device compatible device I/O
provided for with the board.

-- 
Aaron Avery, ASDG Inc.         "A mime is a terrible thing to waste."
                                                             -- Robin Williams
ARPA: madnix!aaron@cs.wisc.edu   {uunet|ncoast}!marque!
UUCP:   {harvard|rutgers|ucbvax}!uwvax!astroatc!nicmad!madnix!aaron