Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!RICHTER.MIT.EDU!krowitz
From: krowitz@RICHTER.MIT.EDU (David Krowitz)
Newsgroups: comp.sys.apollo
Subject: Re:  Trouble with Workstation Solutions Exatape drive
Message-ID: <8906151752.AA01351@richter.mit.edu>
Date: 15 Jun 89 17:52:42 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 18

We had a problem with the node crashing under SR9.7.0 on a
DN3000. It turned out to be a problem in AEGIS, not in the
Workstation Solutions driver software. They (Workstation
Solutions) sent us an update version of AEGIS which solved
the problem. SR10.1 may have a similar problem. When your
node goes down, it should display a status code number. If
you use the /com/stcode command after the node comes back
up (or use it on another node) you can find out what the
error message is.


 -- David Krowitz

krowitz@richter.mit.edu   (18.83.0.109)
krowitz%richter@eddie.mit.edu
krowitz%richter@athena.mit.edu
krowitz%richter.mit.edu@mitvma.bitnet
(in order of decreasing preference)