Path: utzoo!attcan!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!msus1.BITNET!APTC1%MKVAX1
From: APTC1%MKVAX1@msus1.BITNET (Verbal masterbation in the body of beauracratic nonsence)
Newsgroups: comp.sys.apple
Subject: RE: Joystick Conversion
Message-ID: <8906220157.aa04483@SMOKE.BRL.MIL>
Date: 22 Jun 89 05:20:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 4

Well, I had the same set up.  All I did is take a good sharp razor to the edges
of the pot and trimmed the connector down to fit through the small access
hole/slot on the back of the GS.  Not worth pouring a lot into that old Joystick
because it really doesn't work great at full speed anyway.