Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!rochester!rit!ultb!clf3678
From: clf3678@ultb.UUCP (C.L. Freemesser)
Newsgroups: comp.sys.atari.st
Subject: Re: Help with hooking up a SONY DS mechanism
Summary: Need more info to help ya!
Keywords: SS drive casing and Sony Ds mech
Message-ID: <922@ultb.UUCP>
Date: 13 Jun 89 01:53:36 GMT
References: <1887@jhunix.HCF.JHU.EDU> <899@ultb.UUCP> <1904@jhunix.HCF.JHU.EDU>
Reply-To: clf3678@ultb.UUCP (C.L. Freemesser (709ITP))
Organization: Rochester Institute of Technology, Information Systems
Lines: 18

<message deleted 'cause subject says it all>

What is the model number on that drive?

If it doesn't have the standard 34 pin connector on it, and you didn't
buy it brand new, chances are very good that it is an OEM part made
for some manufacturer by Sony.

The pins SHOULD have the right signals, and it's just a matter of
building a cable.  You might be able to get the pin-outs from Sony.

Again, post the model number!


Chris Freemesser, Rochester Institute of Technology | What I like :
BITNET: %clf3678@RITVAX                             | 1) My Atari ST
USENET: Just reply and hope it gets through         | 2) My '77 Mercury
"Another brilliant mind ruined by higher education" | 3) Coke Classic