Path: utzoo!attcan!uunet!peregrine!ccicpg!cci632!rit!ultb!clf3678
From: clf3678@ultb.UUCP (C.L. Freemesser)
Newsgroups: comp.sys.atari.st
Subject: Mono monitor problems
Summary: Need some fine tuning help
Keywords: Atari, ST, monitor, problems
Message-ID: <936@ultb.UUCP>
Date: 17 Jun 89 21:15:53 GMT
Reply-To: clf3678@ultb.UUCP (C.L. Freemesser (709ITP))
Organization: Rochester Institute of Technology, Information Systems
Lines: 25


Howdy all, have a small problem.
I picked up a monochrome monitor this week (used, $75), and need some
help on fine tuning it.

I did the screen enlargement, but there are two problems with this
monitor.  For reference, this one was built in July, 1985.  

1) Screen jitter:  Seems that the screen has a slight vertical jitter.
   What causes this, and is there any way I can fix it?  It is somewhat
   annoying.

2) Screen "bent":  The top right corner of the screen is "bent".  There
   are some sort of magnets on the yoke (4 of them) that I assume
   control the deflection at the corners.  How do I fix this problem?
   I did try moving them (loosened the screw and slid it around).  The
   bend is not terribly bad, but it IS noticible.

Thanks in advance for your QUICK reply.   :^)


Chris Freemesser, Rochester Institute of Technology | What I like :
BITNET: %clf3678@RITVAX                             | 1) My Atari ST
USENET: Just reply and hope it gets through         | 2) My '77 Mercury
"Another brilliant mind ruined by higher education" | 3) Coke Classic