Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!lilink!joeg
From: joeg@lilink.UUCP (Joe Gelman)
Newsgroups: comp.sys.atari.st
Subject: Fujitsu Drive Problem
Summary: Media change detection not working
Message-ID: <741@lilink.UUCP>
Date: 20 Jun 89 03:45:58 GMT
Reply-To: joeg@lilink.UUCP (Joe Gelman)
Distribution: usa
Organization: LILINK Public Xenix, Long Island, New York
Lines: 14


      I've installed a Fujitsu 720K DS drive in place of the standard Atari
SS drive. (Direct swap into Atari's case).  The drive works fine except for
it's failure to detect a disk change unless it's write-protected. 

      I traced the problem to a different signalling scheme at the pins
responsible for telling the ST about the swap. Does anyone have the fix for
this, or have I acquired the wrong drive for use with the ST?


-- 
PO Box:     rutgers!lilink!joeg               *simple, but will it work?*
=========================================================================
LILINK Public Access Xenix  (516) 872-2137/2138/2349 1200/2400 Login: new