Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!mcvax!hp4nl!eutrc3!rcbamw From: rcbamw@eutrc3.UUCP (m.waucomont) Newsgroups: comp.sys.mac Subject: Re: Mac Schematics, Laserwriter boards Keywords: Need Mac Schematics, Have Laserwriter boards Message-ID: <720@eutrc3.UUCP> Date: 14 Jun 89 10:23:40 GMT References: <262@premise.ZONE1.COM> Reply-To: rcbamw@eutrc3.UUCP (m.waucomont) Organization: Eindhoven University of Technology, The Netherlands Lines: 38 In article <262@premise.ZONE1.COM> brian@premise.ZONE1.COM (Brian Moran) writes: >I have acquired some Mac motherboards, 512k, +, SE, and II; I would like >to make a "Hackintosh" with some of these boards, but to do so I need to know >the pinouts of the power and video connectors -- I think I remember that I You don't need MacUnderground docs for this kind of info. Straight from 'Macintosh Family Hardware Referenve' (ISBN 0-201-19255-1, well worth the $26.95 it sells for!!!!) : (1) Video (7) Ground (2) has got no pin :-)) (8) -12V (3) Hsync (9) Ground (4) Internal speaker (10) +12V (5) Vsync (11) Battery (6) +5V This is for the classic Macintosh (512, plus). I will not tell you the pinouts for the SE, just to _force_ you to buy the book. If you really intend to make a Hackintosh, you will _need_ it!!!! >Also, I got in the same lot some controllers for the LaserWriter IINTX and >LaswerWriter IISC. Since we have neither, I would like to get rid of these; >send me email if you are interested (these look pretty powerful; 680x0 and >memory etc). > >Thanks! > Trade for my copy of the hardware reference manual :-)) Where do you get this stuff??? I definitely am interested! Michel 'Mikki' Waucomont rcbamw@eutrc3.UUCP PostScript.um: I own a 512, upgraded to 1Mb, in a Lisa casing. Is this a Hackintosh? No! I had no choice.. as a 'poor' student who fell in love with the Mac I could not afford anything better than this homebrew product. BBBBBBUT... by september I will have a *real* Plus...