Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: eplrx7!mcneill@uunet.uu.net (Keith McNeill)
Newsgroups: comp.sys.sun
Subject: want to hook up 2nd shoebox to 3/60
Keywords: Hardware
Message-ID: <3540@kalliope.rice.edu>
Date: 24 May 89 19:13:02 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 15
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 8, Issue 6, message 12 of 12

I want to hook up a 2nd shoebox to a 3/60.  I tried it and it didn't work.
I actually looked at the documentation and all it told me was that you put
the 2nd shoe box 1st in the chain.  It seems to me that there should be
some sort of jumper that I have switch to change the SCSI address of the
disk & tape drive.  Do these jumpers exist...if so where are they?

Much Thanks!

Keith

-- 
    Keith D. McNeill              |    E.I. Du Pont de Nemours & Co.
    eplrx7!mcneill@uunet.uu.net   |    Engineering Physics Laboratory
    (302) 695-9353/7395           |    P.O. Box 80357
                                  |    Wilmington, Delaware 19880-0357