Xref: utzoo unix-pc.general:3105 comp.sys.att:6726
Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!n8emr!uncle!jbm
From: jbm@uncle.UUCP (John B. Milton)
Newsgroups: unix-pc.general,comp.sys.att
Subject: Re: 4 MB on UNIXPC
Keywords: HwNotes
Message-ID: <560@uncle.UUCP>
Date: 16 Jun 89 21:44:59 GMT
References: <1989Jun14.042321.511@ivucsb.sba.ca.us>
Reply-To: jbm@uncle.UUCP (John B. Milton)
Organization: U.N.C.L.E.
Lines: 22

In article <1989Jun14.042321.511@ivucsb.sba.ca.us> todd@ivucsb.sba.ca.us (Todd Day) writes:
>I have a Combo Board with 1.5MB in slot three, and a dos73 card in
>slot two.  I want to add my 0.5MB card to slot one, but am not sure
>how to do it.  This may have been talked about before.  If so, could
>someone mail me the instructions?  If not, anyone care to start a
>discussion?

This was the subject of HwNotes06 (and added HwNote06.01):
->Subject: Memory boards this time; HwNote06
->Subject: Upgrade to 512k memory board upgrade; HwNote06.01
This describes the complete procedure for how to modify a 0.5M board so that
it will fill out the 2M expansion memory space. I do not have a procedure for
the Combo board, it looked a lot messyier.

I will mail this one to you. I can mail all or part of this to anyone who wants
it. I sent it to someone, who I forget the name of who was going to put all
of it on Compu$erve.

John
-- 
John Bly Milton IV, jbm@uncle.UUCP, n8emr!uncle!jbm@osu-cis.cis.ohio-state.edu
(614) h:294-4823, w:466-9324; N8KSN, AMPR: 44.70.0.52; Don't FLAME, inform!