Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!cc.imperial.ac.UK!g7ahn
From: g7ahn@cc.imperial.ac.UK ("K. Krallis")
Newsgroups: comp.dcom.modems
Subject: Re: kermit: DEC PDP11/23 <--> IBM AT
Message-ID: <8906291418.aa05377@mvax.cc.ic.ac.uk>
Date: 29 Jun 89 13:18:57 GMT
Sender: usenet@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 17


   Regarding Edwins message in INFO-MODEMS #184,  I would like to inform
you that I have the same problem with PROCOMM Kermit when using
lines with Even Parity. It's OK with 8 bit, No Parity but doesn't
like 7bit Even Parity at all.  Try using a different line setting
(it's easy on the AT side but I don't know what happens on the PDP11
serial port driver).  If instead of PROCOMM use the KERMIT 2.30 program
interactively and the PDP11 Kermit in SERVER or interactive mode,
you may still get good results.

   Costas Krallis G7AHN
   Imperial College
   London, England

E-MAIL :   g7ahn%suna@cc.ic.ac.uk                (JANET)
           UMECE80@vaxa.cc.ic.ac.uk              (JANET)
           KRALLIS@GRATHUN1                      (BITNET/EARN)