Path: utzoo!attcan!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!ucsd!usc!elroy!gryphon!jdm From: jdm@gryphon.COM (John Mesiavech) Newsgroups: comp.sys.amiga Subject: Re: Inexpensive Image Digitizer Summary: Somebody beat you to it. Keywords: Digitizer, Cheap, Kit Message-ID: <17101@gryphon.COM> Date: 25 Jun 89 06:37:20 GMT References: <6824@leadsv.UUCP> Reply-To: jdm@gryphon.COM (John Mesiavech) Organization: Trailing Edge Technology, Redondo Beach, CA Lines: 42 In article <6824@leadsv.UUCP> flournoy@leadsv.UUCP (David Flournoy) writes: > > > >Hi. > > I have been thinking about a project for a inexpensive digitizer for >the amiga. What I hope to do is put together a small CCD imager. The >reason I am posting this is to see if ther is any interest in a kit for >under $100. If there is enough interest I will try to get the thing >published in Amazing or Transactor, and make available circuit board, [some info deleted] > Some specs: > Resolution - 192H x 165V > 8 bits of grey (color is too expensive) > Interface - Serial Port > > It of course will not be a realtime digitizer or be as easy to use as >Digiview, but with some care it should be able to digitize overscan HAM images. David; Sorry man, someone beat you to it. Go to thy nearest store, check out "IMG Scan" by SunRize Industries, list $150. It consists of a CCD sensor connected to a printer head via a fiber optic cable, thereby turning an ordinary printer into a drum scanner. Resolution, whatever is the finest pixel rate on your printer. It's slow, but works. John -- 0-=-=-=-=-=-=-=-=-> All disclaimers apply; I didn't write this <-=-=-=-=-=-0 | ----------------------|------------------- | | "I want a New Duck | John Mesiavech | | One that won't try to bite | net.soldier.of.fortune | | One that won't chew a hole in my socks | {backbone}!gryphon!jdm | | One that won't Quack all night" | Go Purdue! (by req) | | Weird Al Yankovic, "I Want a New Duck" | | 0-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-0