Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!apple!ames!haven!umbc3!snowcat.umbc.edu!todd
From: todd@snowcat.umbc.edu (todd bernard)
Newsgroups: comp.sys.amiga
Subject: Problem with 2000 and Fatter Agnus
Keywords: Fatter Agnus, A2000
Message-ID: <2157@umbc3.UMBC.EDU>
Date: 30 Jun 89 15:27:49 GMT
Sender: newspost@umbc3.UMBC.EDU
Reply-To: todd@snowcat.umbc.edu (todd bernard)
Distribution: usa
Organization: University of Maryland Baltimore County
Lines: 21


 
  I just installed the 1 meg angus in my 2000. It comes up with a meg of 
chip memory, but I've had some strange this start happening. My 2000 (Rev 4.4)
has an 8 up board with 4 megs and a hardframe with a 40 meg HD. With everything
in the system, I open up the clock and it's all screwed up for example the 
second hand will leave orange splotches as it goes around the face. With
floppy disk accesses I will occasionally get read/write error requestors,
if I click on retry everthing is fine. Also with floppy disk accesses the screen
will flash.
 So I thought it might be the expansion boards not getting along with Agnus.
I pulled them out and the machince seems to work like normal about have the 
time. I was just wondering if there might be something with my mother board
rev and the new agnus.
  Thanks
         Todd


Todd Bernard           Disclaimer: Anthing said here is not my
todd@umbc3.umbc.edu                employer's opinion.