Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!bloom-beacon!bu-cs!bucsb!bear
From: bear@bucsb.UUCP (Blair M. Burtan)
Newsgroups: comp.sys.amiga
Subject: Re: Inexpensive Image Digitizer
Message-ID: <2742@bucsb.UUCP>
Date: 6 Jul 89 17:39:43 GMT
References: <6824@leadsv.UUCP>
Reply-To: bear@bucsb.bu.edu (Blair M. Burtan)
Followup-To: comp.sys.amiga
Organization: Boston Univ Comp. Sci.
Lines: 14

In article <6824@leadsv.UUCP> flournoy@leadsv.UUCP (David Flournoy) writes:
>
>     I have been thinking about a project for a inexpensive digitizer for
>the amiga.  What I hope to do is put together a small CCD imager.  The
>reason I am posting this is to see if ther is any interest in a kit for
>under $100.  If there is enough interest I will try to get the thing
>published in Amazing or Transactor, and make available circuit board,
>parts, and some software.  Like the Lucas Project.
>
Sure I'll buy one.  It would be interesting just as a hardware
hack to build.  I'd like to see it connected to the expansion
port to see how to interface to it properly.

                                   Bear