Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!motcsd!hpda!hpcuhb!hpindda!tribby
From: tribby@hpindda.HP.COM (David Tribby)
Newsgroups: comp.sys.apple
Subject: Re: Problem with TML Pascal
Message-ID: <6230038@hpindda.HP.COM>
Date: 27 Jun 89 16:28:18 GMT
References: <9660@boulder.Colorado.EDU>
Organization: HP Information Networks Group/Cupertino CA
Lines: 27

hartkopf@tramp.Colorado.EDU (HARTKOPF JEFFREY M) writes...
>I'm having a problem with TML Pascal... 
> ...  the compiling and linking goes fine but then at the end it gives me
>the error dialog, "Error in writing to application file" (it compiles to
>memory fine).
> ...    this process *used* to work fine, but now...?  I can't think of
>anything I did that would do it.

Well, Jeff, my experience with TML Pascal is with the APW version, and using
a hard disk. You do not specify what your configuration is, but if you are
using 3.5 inch disks (or if your hard disk is getting full), you may be
right on the edge of running out of room.

Since the compile step works fine, there must be enough room to compile
the source code into relocatable format. Could you move all the relocatable
files to a different disk and try to link them there? Without the source
code on the same disk, it might work.

Or, if you have two disks (counting a RAM disk), you could specify that the
output of the linker should go to a different disk.

Good luck!

--Dave Tribby

                                   - - - - -
        ARPA: tribby%hpda@hplabs.HP.COM   UUCP: hplabs!hpda!tribby