Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!sun-barr!ames!lll-winken!uunet!aecom!werner From: werner@aecom.yu.edu (Craig Werner) Newsgroups: comp.sys.ibm.pc Subject: Seiko CM-1430 Keywords: 800x600 problems Message-ID: <2338@aecom.yu.edu> Date: 7 Jul 89 03:00:25 GMT Distribution: na Organization: Albert Einstein Coll. of Med., NY Lines: 30 The Seiko CM-1430 is a VGA monitor with a dot pitch of .26mm that can do an interlaced 1024x768 that is 8514/A compatible. I have one, really like it, and up until two days ago, would have recommended it without reservation. Now, I have a single reservation. The CM1430 is not a true multiscanning monitor. It has multiple frequencies, but will not sync to all intermediate scanning rates. The VESA mode, 800x600x256 colors, is thereby problematic. With my VGA hardware, it does display at this resolution, but the display rolls approximately twice a second, good for a glance, but lousy for slideshows. A call to Seiko confirms that this occurs with most VGA adapters, with the notable exceptions of the Orchid ProDesigner and another by Tecmar. Presumably, it was one of these that InfoWorld tested the monitor with, since they did not report a problem with the Seiko monitor, and otherwise gave it a good review (they reviewed it after I bought it, but it was a nice confirmation). Hence, if you want this resolution, you have to go with a rather limited number of adapter cards, OR buy a different monitor. One monitor which seems to be the rough equivalent (and which Sony introduced several weeks after I bought my Seiko monitor) is the Sony MultiSync 3D. It has a street price about $100-$150 greater than the Seiko. I know nothing about its quality (reviews graciously received) but it should not have this annoying problem. -- Craig Werner (future MD/PhD, 4.5 years down, 2.5 to go) werner@aecom.YU.EDU -- Albert Einstein College of Medicine (1935-14E Eastchester Rd., Bronx NY 10461, 212-931-2517) "If you think you might faint, don't worry; you can always go into psychiatry."