Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!mit-eddie!bu-cs!dartvax!eleazar.dartmouth.edu!stevel
From: stevel@eleazar.dartmouth.edu (Steve Ligett)
Newsgroups: comp.sys.mac
Subject: Re: Mac Schematics, Laserwriter boards
Keywords: Need Mac Schematics, Have Laserwriter boards
Message-ID: <14106@dartvax.Dartmouth.EDU>
Date: 27 Jun 89 14:44:36 GMT
References: <262@premise.ZONE1.COM> <720@eutrc3.UUCP>
Sender: news@dartvax.Dartmouth.EDU
Organization: Dartmouth College, Hanover, NH
Lines: 20
Reply>To: stevel@eleazar.dartmouth.edu (Steve Ligett)

In article <720@eutrc3.UUCP> rcbamw@eutrc3.UUCP (m.waucomont) writes:
-In article <262@premise.ZONE1.COM> brian@premise.ZONE1.COM (Brian Moran) writes:
--I have acquired some Mac motherboards, 512k, +, SE, and II;  I would like
--to make a "Hackintosh" with some of these boards, but to do so I need to know
--the pinouts of the power and video connectors
-Straight from
-'Macintosh Family Hardware Referenve' (ISBN 0-201-19255-1, well worth the
-$26.95 it sells for!!!!) :
-(Pinout for Classic Mac power supply to logic board cable deleted)
-... I will not tell you the
-pinouts for the SE, just to _force_ you to buy the book.

I don't think the pinout of the logic board connector for the SE's is in
the book.  Just the power supply connector -- and the power supply
connects to the analog board, not the logic board.  I had to scope out
the logic board connector when I upgraded a 512KE to an SE/30.  But I
don't have the pinout with me.  Drop me a note if you want it.

Steve Ligett       steve.ligett@dartmouth.edu or
(decvax harvard linus true)!dartvax!steve.ligett