Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!husc6!ogccse!afoster
From: afoster@ogccse.ogc.edu (Allan Foster)
Newsgroups: comp.sys.mac
Subject: Re: Dumping Postscript to Disk rather than sending to printer?
Message-ID: <3539@ogccse.ogc.edu>
Date: 2 Jul 89 23:31:41 GMT
References: <1105@snjsn1.SJ.ATE.SLB.COM> <89179.113948MSR104@PSUVMXA>
Reply-To: afoster@ogccse.UUCP (Allan Foster)
Organization: Oregon Graduate Center, Beaverton, OR
Lines: 33

In article <89179.113948MSR104@PSUVMXA> MSR104@PSUVMXA.BITNET (Mike Rineer) writes:
>There is only one way I've heard how to do this:
>
>      In MSWord version 3.02, select 'Print' from the file menu.
>      Hold down <COMMAND>-F and click on the 'OK' button.
>      It should then generate a postscript file on your disk.
>
>If ya don't have MSWord, then you're S.O.L.
>(at least according to my limited knowledge).
>
Not True,

This little trick will work on anything that uses the
standard Laserwriter driver.

By the way, command -F and Command K will both work,
one gives you the laserPrep file included, the other
does not.

Regards

Allan Foster
GURU
afoster@cse.ogc.edu
 

  


-- 
Allan Foster      UUCP  : tektronix!ogcvax!afoster
CSNet : afoster@cse.ogc.edu      GEnie  : A.FOSTER
AppleLink : UG0035                 MacNet : FOSTER