Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!husc6!rice!sun-spots-request
From: rosalie@sunny.dab.ge.com (Rosalie Bibona)
Newsgroups: comp.sys.sun
Subject: PGM problem
Keywords: Software
Message-ID: <4083@kalliope.rice.edu>
Date: 22 Jun 89 14:43:45 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 24
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 8, Issue 47, message 11 of 15

I was wondering if anyone out there can help me with this problem.  My
configuration consists of a Sun 3/260 running OS 4.0.1 with a TAAC board
and an Eikonix 1412 digitizing camera. We randomly crash with a kernel
error when digitizing... the error "panic: hat_unload - pgm not kept".

This happens also on the Sun 4/260 running OS 4.0.1 with a TAAC board and
an Eikonix 1412 digitizing camera. We randomly crash with a kernel error
when digitizinng... the error "panic: hat_unload - pgm not kept"..  BAD
TRAP...kernel read fault at addr=0xff22b2d0- pme0x0...Bus error Reg 80...
The error messages on the Sun 4 are more robust, but nobody can find the
problem...

I checked the obvious culprit which is the CPU board. The Sun 3/260 has a
cpu rev level of 15 and the sun 4/260 has a rev level of 4. 

Any suggestions will be appreciated....

thanks
roe

Rosalie Bibona <rosalie@ge-dab.DAB.GE.COM>
                                            General Electric Company
UUCP:   ...!mcnc!ge-dab.GE.COM!rosalie      1800 Volusia Ave, Rm 4333
Voice:  +1 904 239 2045		            Daytona Beach, FL 32015