Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!husc6!rice!sun-spots-request
From: gfr@cobra.mitre.org (Glenn Roberts)
Newsgroups: comp.sys.sun
Subject: Re: Arrow keys and Type 4 keyboard
Keywords: Hardware
Message-ID: <4145@kalliope.rice.edu>
Date: 27 Jun 89 12:10:28 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 33
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 8, Issue 53, message 7 of 17

Ref: v8n50

> > ..previous discussion regarded fact that the termcap entries for the
> > type 'sun' differ on the 386i and the Sun-3/4 and the problem this
> > causes (arrow keys don't work) when  rlogged in from the 386i.
> > Suggested fix was to invent a new terminal type:
>
> Change the Type-4 line to:
> 
> 	M$|sun-t4|Sun Microsystems Workstation type 4 keyboard:\
> 	^^ ^^^^^^
> 	These identifiers aren't used yet.
>
> Set your terminal type accordingly.

Yes, but the problem is that I am not the administrator on many (most?) of
the Sun 3/4 systems I deal with.  Inventing a new terminal type means that
I would have to convince everyone I deal with to put that entry into their
termcaps and to do so on all new machines as they are installed.

I have been told that 'setkeys noarrows' is supposed to do what I want,
but the 'setkeys' program is not available on the 386i (no it is not in
/usr/old or the 'old' cluster).  The replacement for 'setkeys' is supposed
to be 'loadkeys', but as far as I can tell, loadkeys would only let me
change which key produces the logical function 'uparrow' - what I need to
do is change the meaning of 'uparrow' from \E[215z to \E[A.  Likewise for
the other arrow key functions.

There's got to be an easy way to do this.  Does anyone out there log into
a Sun 3 or 4 from their 386i?  Do arrow keys work for you?

- Glenn Roberts, MITRE
  groberts@mitre.org