Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!uxc.cso.uiuc.edu!uxc.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!jsa00564
From: jsa00564@uxa.cso.uiuc.edu
Newsgroups: comp.dcom.lans
Subject: Re: Info on twisted pair w/ voice/data
Message-ID: <114400005@uxa.cso.uiuc.edu>
Date: 18 Jul 89 03:50:00 GMT
References: <20473@cup.portal.com>
Lines: 16
Nf-ID: #R:cup.portal.com:20473:uxa.cso.uiuc.edu:114400005:000:580
Nf-From: uxa.cso.uiuc.edu!jsa00564    Jul 17 22:50:00 1989


We have a 60+ node LAN running completely on SynOptics 10MB twisted
pair.  The data runs over two pairs of a 4-pair D-station wire.  The
other two pairs are used for either voice, or some other data (occasional
VT-220 terminal).  We don't have any problems with voice on the same 
wiring.  Our phone system in an NEC 2400 PBX, and some of the phones
are even digital, and THEY don't even seem to bother the LAN.


------------------
Jeff Autor
jsa00564@uxa.cso.uiuc.edu
Student at the University of Illinois
Also affiliated with Valmont Electric

Opinions expressed are my own.