Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!husc6!spdcc!dyer
From: dyer@spdcc.COM (Steve Dyer)
Newsgroups: comp.dcom.modems
Subject: Re: How to speed up uucp with Telebits (only getting 800 chars/sec )
Message-ID: <3758@ursa-major.SPDCC.COM>
Date: 18 Jul 89 01:51:50 GMT
References: <200038@hrc.UUCP> <1160@intercon.UUCP> <9585@alice.UUCP> <60403@uunet.UU.NET> <5041@ficc.uu.net>
Reply-To: dyer@ursa-major.spdcc.COM (Steve Dyer)
Organization: S.P. Dyer Computer Consulting, Cambridge MA
Lines: 12

In article <5041@ficc.uu.net> karl@ficc.uu.net (karl lehenbauer) writes:
>I could not get 19.2 kbps to work reliably on an unloaded 16 MHz 386 equipped
>with a zero-wait cache and a dumb board.  It's OK with a smart one, at least
>so far (load is still pretty low.)

Huh?  XENIX 386 has always worked fine with 4 Telebits at 19.2kb on a 4-port
dumb Digiboard.  The machine was a PC AT with an Intel Inboard 386/AT.

-- 
Steve Dyer
dyer@ursa-major.spdcc.com aka {ima,harvard,rayssd,linus,m2c}!spdcc!dyer
dyer@arktouros.mit.edu