Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!sun-barr!texsun!texbell!vector!telecom-gateway From: edg@cbnewsd.att.com (edwin.g.green) Newsgroups: comp.dcom.telecom Subject: Re: 10666 and 5ESS Message-ID: Date: 17 Jul 89 11:54:28 GMT Sender: news@vector.Dallas.TX.US Organization: AT&T Bell Laboratories Lines: 13 Approved: telecom-request@vector.dallas.tx.us X-Submissions-To: telecom@eecs.nwu.edu X-Administrivia-To: telecom-request@vector.dallas.tx.us X-TELECOM-Digest: volume 9, issue 243, message 6 of 9 In article you write: >I know of a similar bug regarding 411 and 3-ports on the 1AESS. If you >three-way to 411, and then try to release, you can't get away from the >circuit. You have to hang up entirely, call the party back, and re-begin >the call sequence again, omitting the call to 411. >That bug has been around for years. Not a bug! Generally, when you dial 411, call supervision is passed to the called party (411). This is done so that when some one calls with an emergency, the connections stay in place until the caller can be identified. Consequently, you cannot drop the connection.