Xref: utzoo comp.dcom.modems:4099 comp.mail.uucp:3348
Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!ispi!jbayer
From: jbayer@ispi.UUCP (Jonathan Bayer)
Newsgroups: comp.dcom.modems,comp.mail.uucp
Subject: Re: T1000
Message-ID: <665@ispi.UUCP>
Date: 7 Jul 89 12:16:26 GMT
References: <38@holston.UUCP>
Followup-To: comp.dcom.modems
Organization: Intelligent Software Products, Inc.
Lines: 32

barton@holston.UUCP (barton) writes:

>I'm considering adding the T1000 to our system and have a couple
>of questions.

>1. Is there a special program needed to dial the T1000, I've heard
>reference to the dialTBIT program. Do I need this? Where do I get
>it?

Yes.  Call SCO and ask for the Telebit diskette.  Then you will have
to reconfigure UUCP to call the dialTBIT program instead of the normal
dialer.


>2. Since the T1000 is neither V.32 nor MNP supportive, should we
>get the T2500 instead? Will we be left in the cold when a pre-  
>dominate 9600b standard emerges?

You will have to consider what you want to do.  V.32 and MNP are not any
faster then the T-1000.  If all you want to do is to connect with other
sites that also have Telebits then go with the T-1000.  If you are going
to be a dial-in site for many different systems, some of which will have
MNP or V.32, then go with the T-2500.



JB
-- 
Jonathan Bayer			      Beware: The light at the end of the
Intelligent Software Products, Inc.	      tunnel may be an oncoming dragon
500 Oakwood Ave.				...uunet!ispi!root
Roselle Park, NJ   07204    (201) 245-5922    jbayer@ispi.UUCP