Xref: utzoo comp.os.minix:6364 comp.sys.amiga:36992 comp.sys.amiga.tech:6202
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!bionet!ames!lll-winken!uunet!mcvax!kth!draken!bmc1!kuling!marten
From: marten@kuling.UUCP (M}rten Norman)
Newsgroups: comp.os.minix,comp.sys.amiga,comp.sys.amiga.tech
Subject: Re: 75/1200 baud modem in software?
Message-ID: <1052@kuling.UUCP>
Date: 16 Jul 89 14:31:33 GMT
References: <539@vice2utc.chalmers.se>
Organization: DoCS, Uppsala University, Sweden
Lines: 13

From article <539@vice2utc.chalmers.se>, by d5kwedb@hacke9.dtek.chalmers.se. (Kristian Wedberg):
> 
> Altzo, is it possible to transmit 75 bit/s and receive 1200 bit/s over
> the serial port? At the same time? Or would you need some kind of transformer?

As 1200/75=16 it _should_ be possible, if you are willing to fiddle with the
hardware registers. Just send 16 "1200-speed-bits" to represent a "75-bit".
The Hardware serial output register should agree with this, but i _dont_
think it's supported in standard software :-)

---

M}rten Norman          EMAIL: marten@kuling.uucp