Xref: utzoo comp.sys.ibm.pc:31716 comp.periphs:1915
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!cs.utexas.edu!uunet!mcvax!unido!rwthinf!franke
From: franke@rwthinf.UUCP (Christian Franke)
Newsgroups: comp.sys.ibm.pc,comp.periphs
Subject: HELP: Colorado Jumbo Programming
Keywords: Colorado Jumbo, Backup, Tape
Message-ID: <1136@rwthinf.UUCP>
Date: 18 Jul 89 08:37:42 GMT
Followup-To: poster
Organization: RBI - RWTH Aachen
Lines: 25


We have a Colorado Jumbo DJ-10 Backup Tape Drive connected to an AT via the
built-in floppy controller.

The backup software included is not sufficient to our needs.
To do our own we need the following:

1. The tape format specification (QIC 40).

2. Information about how to control the tape via the floppy interface.

Perhaps someone can help us.

Thanks in advance

	Christian Franke

	Aachen University of Technology
	Lehrstuhl fuer Informatik I
	Ahornstrasse 55
	D-5100 Aachen
	Federal Republic of Germany
	Tel.: 0241 / 80-3586

	UUCP: franke@rwthinf.uucp ({...mcvax}!unido!rwthinf!franke)