Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!sun-barr!newstop!texsun!texbell!attctc!nasa
From: nasa@attctc.DALLAS.TX.US (Daniel Poirot)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: PC/IP setup ???
Message-ID: <8573@attctc.DALLAS.TX.US>
Date: 7 Jul 89 21:04:15 GMT
Reply-To: nasa@attctc.Dallas.TX.US (Daniel Poirot)
Organization: The Unix(R) Connection BBS, Dallas, Tx
Lines: 31

--------------------------------------------------------------------------

I just ftped PC/IP off of husc6 and compiled it with MSC 5.1.  I have a 
Western Digital wd8003 card and compiled the programs using that library 
with out any trouble.  I want to use the software in a 16 MHz 386 clone
that is running the 386-To-The-Max memory manager.

Now the fun starts.

I have not been able to get anything in the set of programs to work.  I have
used CUSTOM.EXE to modify NETDEV.SYS with what I think are the proper settings.
The card is set for INT=2, no DMA, base address at 0x0c8000, and has I/O 
mapped at 0x280.

When I tell CUSTOM.EXE to use shared memory starting at c8000, the 386-To-The-
Max software reports a memory violation error.  When I tell it shared memory
starts at c800, nothing works either.  I have set up an entry for a name server
but the programs report that the name server times out.  PING of a valid
Internet address also times out.

Any ideas?  The blurb that accompanies the package suggests that it works with
a Western Digital interface.  I would be interested in any information
available about setting up the package.  I know my interface is working, 
because the NCSA telnet/ftp stuff works just fine.

Thanks,

Daniel Poirot		nasa@attctc.dallas.tx.us
Lockheed C87            phone 713/483-2426
2400 Nasa Rd. 1         phax  713/483-6120
Houston, TX 77536	"A mind is a terrible thing."