Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!bbn!ulowell!m2c!wpi!john
From: john@wpi.wpi.edu (John F Stoffel)
Newsgroups: comp.sys.amiga
Subject: Re: DigiView and 68020
Message-ID: <3162@wpi.wpi.edu>
Date: 11 Jul 89 00:46:25 GMT
References: <8907102005.AA29826@decwrl.dec.com>
Reply-To: john@wpi.wpi.edu (John F Stoffel)
Organization: Worcester Polytechnic Institute, Worcester, MA. USA
Lines: 24

In article <8907102005.AA29826@decwrl.dec.com> macdonald@dickns.dec.com (Paul MacDonald, CUP/ASG, 223-3439, PKO3-1/W30) writes:
>
>Yes, DigiView works with a 68020. In my case, its an A2620 board. However,
>the DigiDroid appears to have a problem. It doesn't align properly when I
>attempt to use it in 68020 mode. Consequently, I generally use DigiView

You have to turn off the instruction cache on the 68020, then it will
work fine.  To do this, get a copy of Dave Haynie's SetCPU v1.4 (is
1.5 out yet?  I can't remember...).

>in 68000 mode. BTW, DigiView doesn't seem to care that I have a Fat Agnus.
>Does anyone know if this is a known problem?

Can this be called a problem at all?  I'd be giving thanks to the gods
myself... especially considering how many programs seem to have
problems with Fat Agnus machines with only 1 meg of RAM.  




-- 
John Stoffel        | john@wpi.bitnet    | What can you expect of a day
WPI, Box 2432       | john@wpi.wpi.edu   | that begins with getting up
Worcester, MA 01609 | husc6!m2c!wpi!john | in the morning?
	 	--Damm the Disclaimers!  Full flame ahead!--