Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!gem.mps.ohio-state.edu!ginosko!uunet!portal!cup.portal.com!Doug_B_Erdely
From: Doug_B_Erdely@cup.portal.com
Newsgroups: comp.sys.amiga
Subject: Re: Supra Controllers and SCSI ID's
Message-ID: <20423@cup.portal.com>
Date: 14 Jul 89 04:32:26 GMT
References: <20240@cup.portal.com> <20392@cup.portal.com>
Distribution: na
Organization: The Portal System (TM)
Lines: 17

Thad, I had checked and rechecked everything, but it was NOT working. I was
getting multiply mounted partitions on ONE HD. However, I am glad to report
that I got ahold of Supra Software II and it is working just fine now. I have
the Maxtor set at SCSI ID 1 and the NEW software can even detect this right 
away!! It selected SCSI ID 1, even before I formated the drive. So it 
appears to be working just fine. One thing that was 'weird'. With the new
software you can select either 'skip' 'mount' 'boot' for EACH partition.
I set the system up to just mount all partitions, and when it tried to 
mount the system. It told me that I HAD to have at least one partition set
to the 'boot', even if I did not have the means to do 'autoboot'!! Seems kinda
strange, huh? But what the hell, it is working great. And the new software is
nice.

	- Doug -


Doug_B_Erdely@Cup.Portal.Com