Xref: utzoo comp.sys.amiga:36834 comp.sys.amiga.tech:6165
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!iuvax!cica!tut.cis.ohio-state.edu!dsacg1!dsacg2!nor1675
From: nor1675@dsacg2.UUCP (Michael Figg)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: Digital audio sample player
Keywords: audio, copper, audiotools
Message-ID: <696@dsacg2.UUCP>
Date: 14 Jul 89 13:52:03 GMT
Organization: Defense Logistics Agency Systems Automation Center, Columbus
Lines: 22

A couple of weeks ago I asked help in programming an audio sample player
with copper instructions (in 'C'). I knew at the time that this was 
probably NOT the best way to approach this, but wanted to try it anyway.
After talking it over with a friend it struck me that of couse I couldn't
just ignore the video and concentrate on the audio since I didn't want any
video, but that I needed to tie it in with the current copper lists. I 
haven't spent much time on this lately but will probably return to it soon.

What I really want to know now is what are the accepted or usual ways to do
this? All I know of is going through the copper or using R. Pecks' AudioTools
new version with PlaySample(), as Rob mentioned but he seemed to also 
mention that this was only released to the latest DEVCON and wasn't available
anywhere else. I haven't seen it around. Any thoughts about how to approach
the audio question would be welcome, as would information on AudioTools
availability.

					 Thanks,
-- 
"Hot Damn! Groat Cakes Again                   Michael Figg
Heavy on the thirty weight!"                   DLA Systems Automation Center
                                               Columbus, Oh.
                                               (614)-238-2446 (Temporarily)