Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!bellcore!texbell!merch!cpe!hal6000!trsvax!jbh
From: jbh@trsvax.UUCP
Newsgroups: comp.sys.amiga
Subject: Re: F/A 18 on hard drive?
Message-ID: <271800002@trsvax>
Date: 13 Jul 89 13:25:00 GMT
References: <6530001@hp-ses.SDE.HP.COM>
Lines: 9
Nf-ID: #R:hp-ses.SDE.HP.COM:6530001:trsvax:271800002:000:445
Nf-From: trsvax.UUCP!jbh    Jul 13 08:25:00 1989


To make F18 Interceptor run on a hard drive, you must look for the string
"df0:" within the program, and change it to a logical drive string.
I changed mine to F18:, then ASSIGNed F18: to the appropriate pathname
( FAST1:games/f18 in my case ). Use FILEZAP or some other utility that
will let you dump ASCII contents and make changes.
P.S. Do this on a BACKUP copy of the program ( obviously! ). Good luck
shooting down that cruise missle.
Brad