Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!leah!albanycs!crdgw1!uunet!mcvax!kth!sunic!enea!tope
From: tope@enea.se (Tommy Petersson)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Flicker Fixer and AmiGen
Message-ID: <124@enea.se>
Date: 17 Jul 89 15:03:30 GMT
References: <3593@hplabsz.HPL.HP.COM> <1617@sactoh0>
Reply-To: tope@helios.se (Tommy Petersson)
Organization: Enea Data AB, Sweden
Lines: 27
UUCP-Path: mcvax!kth!sunic!helios!tope

In article <1617@sactoh0> hrlaser@sactoh0 (Harv R. Laser) writes:
-
-Peter Selverstone, engineer of the Flicker Fixer for Microway
-asked me to post this reply in his behalf.
-(This is Peter talking now... :-)
-
-adapter, but not with a genlock. There is no need to remove the ff
-board while using an external genlock, but the ff will not sync
-properly while the Amiga is in genlock mode.
-BUT......MicroWay is in final beta test of an inexpensive (<$50)
-genlock compatibility option board. This is a little piggyback
-board
-that can be installed on any NTSC flicker fixer that will allow
-it to be used simultaneously with an external genlock. It will be
-formally introduced at AmiExpo in Chicago at the end of the month.
-
-   Peter Selverstone - Spy Pond Systems, Arlington MA
-   PLINK pselverst, BIX pselverstone, CIS 72527,2652
-
----------------------------------
-Many thanks, Peter
-

Any plans for a piggyback for the PAL FlickerFixer?

Tommy P.
tope@enea.se