Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!RICHTER.MIT.EDU!krowitz
From: krowitz@RICHTER.MIT.EDU (David Krowitz)
Newsgroups: comp.sys.apollo
Subject: Re:  Adding third party boards to an AT bus machine
Message-ID: <8907101253.AA01595@richter.mit.edu>
Date: 10 Jul 89 12:53:42 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 17

You will want a copy of the "Writing Device Drivers with GPIO"
manual. The SR9.7 GPIO release tapes come with a number of sample
drivers which are installed in the /domain_examples directory.
Apollo has these "CPU configuration" worksheets (actually little
cardboard cards) which list the reserved interrupt lines and
device addresses for each of the different CPU types and the 
various standard Apollo devices. You can probably get a copy from
your field service personnel.


 -- David Krowitz

krowitz@richter.mit.edu   (18.83.0.109)
krowitz%richter@eddie.mit.edu
krowitz%richter@athena.mit.edu
krowitz%richter.mit.edu@mitvma.bitnet
(in order of decreasing preference)