Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucsd!nosc!peanuts.nosc.mil!hidinger From: hidinger@peanuts.nosc.mil (Ron Hidinger) Newsgroups: comp.sys.apollo Subject: Re: Benchmarks for DN10000? Message-ID: <1376@nosc.NOSC.MIL> Date: 17 Jul 89 14:53:43 GMT References: Sender: nobody@nosc.NOSC.MIL Reply-To: hidinger@peanuts.nosc.mil.UUCP (Ron Hidinger) Organization: Naval Ocean Systems Center, San Diego Lines: 32 I don't know how reliable these benchmarks are but here are some results obtained with a single cpu loaner from the local office. Not sure how much memory it had, but swapping was not a factor. Time was measured using /bin/time, except the graphics benchmark. Ron Hidinger hidinger@nosc.mil -------------------------------------------------------------- The results are in seconds. The numerical integration involves single and double precision floating point for the most part. The FFT's are single precision. The beam pattern involves a 2 dimensional FFT and false color intensity plot, about 5000 trapezoids. This was a single processor machine with the extra graphics hardware. The pascal compiler was used which according to the salesman is already one revision behind. HOST solve 6 DOF PDE FFT's 2D beam pattern ------- --------------- ----- --------------- DN300 -- DN320 105.8 DN330 59.0 DN460 44.1 DN3000 60.6 DN3000 (SR9.6) 53.5 DN4000 25.9 DN3500 18.6 26.5 ~16 DN3550 18.9 DN4500 13.2 DN10000 1.3 2.9 ~4