Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!pro-abilink.UUCP!lexter
From: lexter@pro-abilink.UUCP (Sam Robertson)
Newsgroups: comp.sys.apple
Subject: Re: Beginner in Assembly
Message-ID: <8907112039.AA02812@crash.cts.com>
Date: 11 Jul 89 06:53:52 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: pnet01!pro-sol!pro-carolina!pro-abilink!lexter@nosc.mil
Organization: The Internet
Lines: 22

Network Comment: to #5929 by obsolete!pnet01!pro-cyon!neilhncc1701d%nosc.mil

Look into the Programmers Introduction to the Apple IIgs, pretty good for the
Assembly stuff.  Just don't mess with the Pascal part of it, more confusing
than it should be!!!!
Also, look into the Updates of the Toolbox manuals.  I haven't gotten them and
have had no real problems, but I hear there is some real important info there!
 
Also, take a look at Tech Notes that you may or may not receive from Apple,
good up to date (not if you frequent this place!!!) information about updates
and tech info!

Sam
------------------------------------------------------------------------------
Applelink:  Lexter               || Sam Robertson   Pro-Abilink 300/1200/2400
GENIE:      SL.Robertson         || 1357 Santos           Sysop (Saw)
Proline:    Lexter@Pro-Abilink   || Abilene Texas 79605   (915)673-6856
INET: Lexter@Pro-Abilink.cts.com || UUCP: Crash!pnet01!pro-abilink!lexter
            ARPA:  Crash!pnet01!pro-abilink!lexter@nosc.mil
------------------------------------------------------------------------------
        " Tuesday Morning, please go away, I'm tired of you. 
           What have I got to lose. "      --   CSN&Y