Path: utzoo!attcan!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!pro-europa.cts.com!terrys
From: terrys@pro-europa.cts.com (Terry Stockdale)
Newsgroups: comp.sys.apple
Subject: Re: Applelink, Personal Edition
Message-ID: <8907160956.AA04735@crash.cts.com>
Date: 15 Jul 89 13:20:18 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: pnet01!pro-nsfmat!pro-europa!terrys@nosc.mil
Organization: The Internet
Lines: 22

Comment to message from: pnet01!crash!pro-sol.cts.com!lbotez (Lynda Botez)

>> Both the modem and printer ports have to be reconfigured to show
>> buffering at Yes, and DCD Handshake and DSR/DTR Handshake at No.  
>> These are not the default selections.  I, also, prefer to leave 
>> my settings at default.

This is the second time I have seen a post quoting this erroneous information
from the AppleLink PE manual.  ALPE DOES require Buffering Yes, but the DCD
and
DSR/DTR can remain at Yes (the default).

I have run this way for months without any problems, and do not have to reset
my control panel to use anything else.
------------------------------------------------------------------------------
Terry Stockdale  --  Houston, Texas     
ProLine : terrys@pro-europa                              
   INET : terrys@pro-europa 
   ARPA : crash!pnet01!pro-nfsmat!pro-europa!terrys@nosc.mil
   UUCP : {nosc,uunet!cacilj,sdcsvax,hplabs!hp-sdd,sun.com}                   
          ...crash!pnet01!pro-europa.cts.com!terrys
------------------------------------------------------------------------------