Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!cs.utexas.edu!uunet!mcvax!kth!draken!d88-jwa
From: d88-jwa@nada.kth.se (Jon W{tte)
Newsgroups: comp.sys.mac.programmer
Subject: Re: Need help w/ Event Manager
Message-ID: <1319@draken.nada.kth.se>
Date: 18 Jul 89 13:50:22 GMT
References: <0Yk12oy00WB6Ek10Zb@andrew.cmu.edu>
Reply-To: d88-jwa@nada.kth.se (Jon W{tte)
Organization: Royal Institute of Technology, Stockholm, Sweden
Lines: 22

In article <0Yk12oy00WB6Ek10Zb@andrew.cmu.edu> al1f+@andrew.cmu.edu (Andy A. Lee) writes:
>I am running a small program called EventTutor from the book "Macintosh
>Programming Primer" with LightSpeed C 3.01.  This program demonstrates

>it should display keyUp:

If you check Inside Macintosh volume I, you'll see that the system event
mask is by default set to mask out keyUp events BEFORE they get posted.
This may be changed with SetEventMask(int mask);
mask should then be everyEvent.

If you consider programming the mac, buy IM vol I, II, IV and V as well
as the technotes (the latter are available in electronic form for free)
and study them. They are a MUST.

Hope this helps,

				h+@nada.kth.se
-- 
 __       Jon W{tte (The dread Smiley Shark) email:h+@nada.kth.se
/  \      (+46 (0) 8 258 268)
   /---   (c) 1989 Yessbox Allright Professional Products Inc. - Y.A.P.P.I.
  /       -- No More --