Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!decwrl!gilroy.pa.dec.com!klee
From: klee@gilroy.pa.dec.com (Ken Lee)
Newsgroups: comp.windows.x
Subject: Re: DECwindows and X11R3
Message-ID: <1565@bacchus.dec.com>
Date: 12 Jul 89 17:24:45 GMT
References: <8907112335.AA05254@sunaus.sun.oz>
Sender: news@decwrl.dec.com
Lines: 21

In article <8907112335.AA05254@sunaus.sun.oz>, swoodhead@SUN.COM (Simon Woodhead) writes:
> I am new to X-windows. Sorry if this has been gone over recently.
> When I get an X11R3 client to display on my DECwindows (ultrix 3.0)
> VAXstation I often get little messages like this (at the client when
> the program is starting up):
> 
>   Xlib:  sequence lost (0x1001a > 0x1b) in reply type 0x13!
> 
> Is it trying to tell me something? The programs seem to work apart from that

Can you be a little more specific, please.  Which release of DECwindows
are you using?  Which machine?  Which clients give you that message?
Does it happen all the time?  Did you build the client with the X11R3
Xlib or the DECwindows Xlib?  There was a bug in UWS2.0 and in X11R2
that gave that error message.  This bug was fixed in UWS2.2 and X11R3.
Try building with one of those Xlib's to see if your problem goes away.

Ken Lee
DEC Western Software Laboratory, Palo Alto, Calif.
Internet: klee@decwrl.dec.com
uucp: uunet!decwrl!klee