Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!oliveb!amdahl!kucharsk From: kucharsk@uts.amdahl.com (William Kucharski) Newsgroups: comp.windows.x Subject: Re: Xterm ESC sequence DOC and question Message-ID: Date: 13 Jul 89 01:17:23 GMT References: <1317@esquire.UUCP> <8907121627.AA04116@expo.lcs.mit.edu> Reply-To: kucharsk@amdahl.uts.amdahl.com (William Kucharski) Organization: Amdahl Coup, UTS Products Hen House Lines: 21 In article <8907121627.AA04116@expo.lcs.mit.edu> jim@EXPO.LCS.MIT.EDU (Jim Fulton) writes: >As was mentioned several months ago, the Xterm Control Sequences Document never >got converted from X10. One person volunteered a while ago, but I haven't heard >back. It should be possible to start with the X10 version and then walk through >the xterm source code.... On that note... Is the appendix in Vol. 3 of the O'Reilly series correct only for X10, or is it correct for X11 as well? -- William Kucharski ARPA: kucharsk@uts.amdahl.com UUCP: ...!{ames,decwrl,sun,uunet}!amdahl!kucharsk Disclaimer: The opinions expressed above are my own, and may not agree with those of any other sentient being, not to mention those of my employer. So there.