Xref: utzoo news.sysadmin:2541 comp.dcom.modems:4106 comp.unix.questions:14762
Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!ames!lll-winken!uunet!wobble!dlu
From: dlu@wobble.uucp (Doug Urner)
Newsgroups: news.sysadmin,comp.dcom.modems,comp.unix.questions
Subject: Re: How to speed up uucp with Telebits(only getting 800 chars/sec )
Message-ID: <1989Jul8.042330.19789@wobble.uucp>
Date: 8 Jul 89 04:23:30 GMT
References: <200038@hrc.UUCP> <1160@intercon.UUCP>
Reply-To: dlu@wobble.UUCP (Doug Urner)
Organization: Uni-Ops Systems, Bellingham, WA
Lines: 21

In article <1160@intercon.UUCP> amanda@intercon.uu.net (Amanda Walker) writes:
>In article <200038@hrc.UUCP>, dan@hrc.UUCP (Dan Troxel) writes:
>> I feed several sites here in Arizona. Most of my sites get at least
>> 1100 chars/second. But there are 2 that are getting 800-900 chars/second.
>
>My guess is that the two sites in question are talking to their
>Telebits at 9600 baud instead of 19200 baud, thus causing a bottleneck
>on their end.  Either that or they're using T1000s, which only go up to
>9600.
>
Sadly that is not always the case.  The best I have been able to do between
wobble and uunet (both Trailblazer+'s and both running the link to the modem
at 19.2) is in the same range.  The B5.00 firmware doesn't make a difference
either.  I am able to get much better through put with local connections
and even down to the Bay Area, but to uunet better than 900 is a real
surprise.  Any thoughts?

Doug
-- 
-----------------------------------------------------------------------------
Doug Urner,  uunet!wobble!dlu,  Uni-Ops Systems, Bellingham, WA  206/676-5759