Xref: utzoo news.sysadmin:2563 comp.dcom.modems:4142 comp.unix.questions:14921 comp.unix.xenix:6712
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!gem.mps.ohio-state.edu!ginosko!uunet!ispi!jbayer
From: jbayer@ispi.UUCP (Jonathan Bayer)
Newsgroups: news.sysadmin,comp.dcom.modems,comp.unix.questions,comp.unix.xenix,comp.unix.i386
Subject: Re: How to speed up uucp with Telebits(only get 9600 out of 386)
Keywords: serial 80386 telebit 19,200
Message-ID: <1085@ispi.UUCP>
Date: 14 Jul 89 12:29:24 GMT
References: <200038@hrc.UUCP> <1160@intercon.UUCP> <1989Jul8.042330.19789@wobble.uucp> <37631@sgi.SGI.COM> <14@fmsystm.UUCP>
Followup-To: news.sysadmin
Distribution: usa
Organization: Intelligent Software Products, Inc.
Lines: 28

macy@fmsystm.UUCP (Macy Hallock) writes:

>In following all this discussion about getting better throughput on
>Telebit Trailblazers, I'd like to know:

>How can I get a simple cheap 19,200 bps serial port on my 80386
>running SCO Xenix 2.3.1?

>The /etc/gettydef seems to allow only for operation to 9600.
>Do I need special hardware?  I am using simple, dumb serial
>cards (8250).

>What do I need to modify in Xenix?



Find the line in /etc/gettydefs which refers to the speed EXTA.  That is
19200 baud.   Make the change in /etc/ttys (for logins).  Make the
change in your /usr/lib/uucp/Devices file (and possibly
/usr/lib/uucp/Systems) for uucp.


JB
-- 
Jonathan Bayer			      Beware: The light at the end of the
Intelligent Software Products, Inc.	      tunnel may be an oncoming dragon
500 Oakwood Ave.				...uunet!ispi!root
Roselle Park, NJ   07204    (201) 245-5922    jbayer@ispi.UUCP