Xref: utzoo comp.sys.att:6920 sci.electronics:6858 sci.med:11026
Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!merlin.usc.edu!aludra.usc.edu!muoto
From: muoto@aludra.usc.edu ("Olivetti")
Newsgroups: comp.sys.att,sci.electronics,sci.med
Subject: Re: re toner hazards (was Re: Conductive Dust Bunnies)
Message-ID: <4318@merlin.usc.edu>
Date: 7 Jul 89 21:21:57 GMT
References: <1989Jun14.042949.597@ivucsb.sba.ca.us> <19512@cup.portal.com> <321@cbnewsi.ATT.COM> <1419@cbnewsc.ATT.COM> <1989Jun28.164955.3005@ziebmef.uucp> <41@oink.UUCP> <Jul.7.16.22.57.1989.4465@paul.rutgers.edu>
Sender: news@merlin.usc.edu
Reply-To: muoto@aludra.usc.edu ("Olivetti")
Followup-To: comp.sys.att
Organization: University of Southern California, Los Angeles, CA
Lines: 24

Newsgroups: sci.electronics
Subject: 15KV Opto-Isolator?
Summary: Looking for an opto-isolator that can switch 15,000 volts
Expires: 8/7/89
References: <18425@mimsy.UUCP> <1989Jul7.155721.19105@utzoo.uucp>
Sender: 
Reply-To: muoto@aludra.usc.edu ("Olivetti")
Followup-To: 
Distribution: 
Organization: CLS, University of Southern California, Los Angeles, CA
Keywords: 


I am looking for an opto-isolator capable of switching 15,000 volts DC.  
The opto-isolators I have run across, however, all seem to have lower
thresholds.  I am wondering if any opto-isolators work at this voltage
and would appreciate any advice or information on a similar device that
would meet my needs.


Oliver "Vetti" Muoto                  |  Phone: (213) 734-5550
Center for Laser Studies, DRB 17      |  Mail : muoto@aludra.usc.edu
University of Southern California     |    
Los Angeles, CA  90089-1112           |