Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!cs.utexas.edu!uunet!image.soe.clarkson.edu!news From: nelson@sun.soe.clarkson.edu (Russ Nelson) Newsgroups: comp.dcom.lans Subject: Re: NI5210 Packet Driver fails w/ 8K board Message-ID: Date: 21 Jul 89 21:07:00 GMT References: <2353@aecom.yu.edu> Sender: news@sun.soe.clarkson.edu Reply-To: nelson@clutx.clarkson.edu Followup-To: comp.dcom.lans Organization: Clarkson University, Postdam NY Lines: 25 In-reply-to: glen@aecom.yu.edu's message of 21 Jul 89 19:46:51 GMT In article <2353@aecom.yu.edu> glen@aecom.yu.edu (Glen M. Marianko) writes: I am having trouble using the NI5210 packet driver distributed by Clarkson on a board that has only 8K on it. The driver fails with "Timed out while initializing 5210." when I try to load a driver on a 5210 that either has an empty memory socket or a novell remote boot prom in it (i.e. 8K RAM only). I have tried this on a few different machines. If you can wait a week, a fixed version will be available. If you're just itching to fix it yourself, then change: ISCPTR EQU B + 03feeh ; my address for ISCP, points to SCB SCPTR EQU B + 03ff6h ; hardwired address for SCP to ISCPTR EQU B + 01feeh ; my address for ISCP, points to SCB SCPTR EQU B + 01ff6h ; hardwired address for SCP and you will be much happier. -russ -- --russ (nelson@clutx [.bitnet | .clarkson.edu])|(70441.205@compuserve.com)