Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!ames!apple!usc!cs.utexas.edu!uunet!wugate!wupost!wupulm!billc
From: billc@wupulm.wustl.EDU (Bill Canning)
Newsgroups: comp.dcom.modems
Subject: Changing default settings on Hayes Smartmodem 2400
Keywords: Smartmodem 2400 defaults setup
Message-ID: <245@wupulm.wustl.EDU>
Date: 19 Jul 89 12:33:27 GMT
Distribution: na
Organization: Washington Univ. Pulmonary, St. Louis
Lines: 16

What is the command to save the default setup on a Hayes Smartmodem 2400?
What I'm looking for is something equivalent to the switch settings that
tell a Smartmodem 1200 what setup to go to when it gets an "ATZ".  I under-
stand there is also a way to save phone numbers in the modem.

I ask these questions only because the person who purchased the modem lost
the manual, so I've been manually setting up the modem in my "/usr/lib/uucp/
Dialers" file, and it takes about 15 seconds before starting to dial the
phone.

Any help would be greatly appreciated!  Please e-mail to the address following
in the signature.

Thanks a lot,
Bill Canning
billc%wupulm@wupost.wustl.EDU