Xref: utzoo comp.sys.apple:14797 comp.os.cpm:2611
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!ucsd!ames!amdahl!pacbell!sactoh0!ianj
From: ianj@sactoh0 (Ian R. Justman)
Newsgroups: comp.sys.apple,comp.os.cpm
Subject: Re: ramdisk under cpm
Summary: Ramdisk
Keywords: apple ramdisk cpm
Message-ID: <1637@sactoh0>
Date: 23 Jul 89 09:58:10 GMT
References: <188@flight.UUCP>
Distribution: na
Organization: SAC-UNIX (Public Access), Sacramento, Ca.
Lines: 30

In article <188@flight.UUCP>, george@flight.UUCP (George Rachor x65135) writes:
> 
> Is there such a thing as a Ram disk driver for the Apple ][ plus under
> cpm?  I have an apple memory expansion card located in slot 2.
> 
> When I boot up prodos this board is found to be a ramdisk called "RAM2".
> 
> I currently have CPM 2.2.  Would such a thing be public domain?

I suggest you give Applied Engineering's CP/AM a whizz.  It has a
program called "RAMDRIVE" which works on //e computers equipped
with ramcards like AE's RamWorks (it won't work with RamFactor or
with the Apple card that you have.  BTW, it ought to be in a slot
other than 2 because that's the standard slot for communications
devices (eg modems, etc.) unless you have a reason for locating it
in slot 2).  However, there is a program with it called "PC" which
will check to see if you have Protocol Cards (I think that is what
it stands for...) like the Disk 3.5 controller (a Central Point
Software Universal Disk Controller will work fine and I strongly
suggest it), a RamFactor, or other cards.  I think it might
recognize your card.

However, if you're using Microsoft's CP/M, as far as I know, you're
stuck.  I haven't seen ramdrive software that will work with
Apple expanded ram cards which are in the public domain.
-- 
Home:   Ian Justman       |UUCP:                 |"One of the few
6612 Whitsett Drive       |                      |die-hard CP/M
North Highlands, CA  95660| pacbell!sactoh0!ianj |addicts left on this
(916) 344-5360            |                      |planet"