Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!purdue!ames!xanth!mcnc!rti!xyzzy!dg-rtp.dg.com!clegg
From: clegg@dg-rtp.dg.com (Alan Clegg)
Newsgroups: comp.os.minix
Subject: UUPC & Protocol questions...
Message-ID: <7888@xyzzy.UUCP>
Date: 19 Jul 89 14:14:40 GMT
Sender: usenet@xyzzy.UUCP
Reply-To: clegg@dg-rtp.dg.com (Alan Clegg)
Organization: Data General Corporation, Research Triangle Park, NC
Lines: 30

#1) I now have the distributed UUPC up and running on my Minix machine,
and about every 1 out of 5 times I can get a connection.  The other 4 times,
I get:

	gspack: tt=2 xxx=1 yyy=0 k=2 sum=-29957
	|H\000\000\000\000\000 ... \00!			<extends off screen>
	waiting for input pkt seq=1
	=> l=0 h=0 g=0
	Lost packet...
	gspack: tt=0 xxx=2 yyy=0 k=9 sum=-21862
	Sending RJ... recv=0
	=> l=0 h=0 g=0

	... repeats ...

	Lost packet...
	Top level state (master mode)

At that point, uucico quits, and leaves the line connected and the LCK file in
/usr/spool/uucp.

Anybody have any ideas on this one?  

#2:  Does anybody have a description of the protocol being used at this point?

Thanks!
-abc
        Alan Clegg         			clegg@dg-rtp.dg.com
	Porting Consultant			clegg@verity.uucp
	Data General Corp.			{...!mcnc!verity!clegg}
	------------------			-----------------------